Part 1
요약·해설
CDC-ACM Console Snippet의 공식 원문 구조, 설정 조건과 실행 흐름을 생략 없이 설명합니다.
Path
snippets/cdc-acm-console/README.html
Version
Zephyr 3.7.0
Status
Full translation
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
891BD7AC0720129EB84EEE567E83F874DA48E66E8AF3908FCD82AB02832720C6
.. _snippet-cdc-acm-console:
CDC-ACM Console Snippet (cdc-acm-console)
#########################################
.. code-block:: console
west build -S cdc-acm-console [...]
Overview
********
This snippet redirects serial console output to a CDC ACM UART. The USB device
which should be used is configured using :ref:`devicetree`.
Requirements
************
Hardware support for:
- :kconfig:option:`CONFIG_USB_DEVICE_STACK`
- :kconfig:option:`CONFIG_SERIAL`
- :kconfig:option:`CONFIG_CONSOLE`
- :kconfig:option:`CONFIG_UART_CONSOLE`
- :kconfig:option:`CONFIG_UART_LINE_CTRL`
A devicetree node with node label ``zephyr_udc0`` that points to an enabled USB
device node with driver support. This should look roughly like this in
:ref:`your devicetree <get-devicetree-outputs>`:
.. code-block:: DTS
zephyr_udc0: usbd@deadbeef {
compatible = "vnd,usb-device";
/* ... */
};
Part 3
한국어 전문 번역
west build -S cdc-acm-console [...]
Overview
이 snippet은 serial console output을 USB CDC ACM UART로 redirect합니다. 사용할 USB device는 Devicetree에서 지정합니다.
Requirements
Hardware와 board configuration은 CONFIG_USB_DEVICE_STACK, CONFIG_SERIAL, CONFIG_CONSOLE, CONFIG_UART_CONSOLE, CONFIG_UART_LINE_CTRL을 지원해야 합니다.
Devicetree에는 driver가 지원하고 enabled된 USB device를 가리키는 zephyr_udc0 node label이 있어야 합니다. 대략 다음 구조입니다.
zephyr_udc0: usbd@deadbeef {
compatible = "vnd,usb-device";
/* ... */
};
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.