samples/userspace/syscall_perf/README.html · samples/userspace/syscall_perf/README.rst 공식 원문 ↗

Zephyr 3.7.0 · Samples · Userspace

System Call 성능

k_current_get()의 cycle·instruction 차이로 privilege boundary overhead를 측정합니다.

Official pathsamples/userspace/syscall_perf/README.html
Source filesamples/userspace/syscall_perf/README.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

User·supervisor thread의 같은 API 호출 경로와 측정값을 설명합니다.

User

System call path

Supervisor

Direct function call

Metrics

Cycles · Instructions

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 A6782001403397CFE21ED3FE768BE9B592DB4221899F4F5DBCB131996D7A67A3
.. _syscall_perf:

Syscall performances
====================

The goal of this sample application is to measure the performance loss when a
user thread has to go through a system call compared to a supervisor thread that
calls the function directly.


Overview
********

This application creates a supervisor and a user thread.
Then both threads call :c:func:`k_current_get()` which returns a reference to the
current thread. The user thread has to go through a system call.

Both threads are showing the number of core clock cycles and the number of
instructions executed while calling :c:func:`k_current_get()`.


Sample Output
*************

.. code-block:: console

    User thread:		   18012 cycles	     748 instructions
    Supervisor thread:	       7 cycles	       4 instructions
    User thread:		   20136 cycles	     748 instructions
    Supervisor thread:	       7 cycles	       4 instructions
    User thread:		   18014 cycles	     748 instructions
    Supervisor thread:	       7 cycles	       4 instructions

Part 3

한국어 전문 번역

User thread가 system call을 거쳐야 할 때와 supervisor thread가 function을 직접 호출할 때의 performance 차이를 측정하는 sample application입니다.

개요

Application은 supervisor thread와 user thread를 하나씩 만듭니다. 두 thread 모두 현재 thread reference를 반환하는 k_current_get()을 호출하지만, user thread의 call은 system call 경로를 거쳐야 합니다.

두 thread는 k_current_get() 호출 동안 소비한 core clock cycle 수와 실행한 instruction 수를 각각 표시합니다.

샘플 출력

Example에서 user thread는 한 call에 약 18,000~20,000 cycle과 748 instruction을 사용하지만 supervisor thread의 직접 호출은 7 cycle과 4 instruction만 사용합니다. 수치는 platform과 build에 따라 달라질 수 있으며 이 출력은 system call 경계의 상대 비용을 보여 줍니다.

User thread:                   18012 cycles      748 instructions
Supervisor thread:         7 cycles        4 instructions
User thread:                   20136 cycles      748 instructions
Supervisor thread:         7 cycles        4 instructions
User thread:                   18014 cycles      748 instructions
Supervisor thread:         7 cycles        4 instructions

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.