Part 1
요약·해설
LoRa Alliance 3개 service, callback, server 요구 사항과 build command를 설명합니다.
TS003-2.0.0
TS005-1.0.0
TS004-1.0.0
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
1774A217395137136499AF408FC2EA84F092149BBAA7B5C218BAF37515E29154
.. zephyr:code-sample:: lorawan-fuota
:name: LoRaWAN FUOTA
:relevant-api: lorawan_api
Perform a LoRaWAN firmware-upgrade over the air (FUOTA) operation.
Overview
********
An application to demonstrate firmware-upgrade over the air (FUOTA) over LoRaWAN.
The following services specified by the LoRa Alliance are used:
- Application Layer Clock Synchronization (`TS003-2.0.0`_)
- Remote Multicast Setup (`TS005-1.0.0`_)
- Fragmented Data Block Transport (`TS004-1.0.0`_)
The FUOTA process is started by the application and afterwards runs in the background in its own
work queue thread. After a firmware upgrade is successfully received, the application is notified
via a callback and can reboot the device into MCUboot to apply the upgrade.
A LoRaWAN Application Server implementing the relevant services is required for this sample to work.
.. _`TS003-2.0.0`: https://resources.lora-alliance.org/technical-specifications/ts003-2-0-0-application-layer-clock-synchronization
.. _`TS005-1.0.0`: https://resources.lora-alliance.org/technical-specifications/lorawan-remote-multicast-setup-specification-v1-0-0
.. _`TS004-1.0.0`: https://resources.lora-alliance.org/technical-specifications/lorawan-fragmented-data-block-transport-specification-v1-0-0
Building and Running
********************
This sample can be found under :zephyr_file:`samples/subsys/lorawan/fuota` in the Zephyr tree.
Before building the sample, make sure to select the correct region in the ``prj.conf`` file.
The following commands build and flash the sample.
.. zephyr-app-commands::
:zephyr-app: samples/subsys/lorawan/fuota
:board: nucleo_wl55jc
:goals: build flash
:compact:
Part 3
한국어 전문 번역
개요
LoRaWAN을 통해 FUOTA(Firmware Upgrade Over The Air)를 수행하는 application입니다. LoRa Alliance가 정한 세 application-layer service를 함께 사용합니다.
- Application Layer Clock Synchronization:
TS003-2.0.0에 따라 device time을 맞춥니다. - Remote Multicast Setup:
TS005-1.0.0에 따라 firmware를 받을 multicast session을 구성합니다. - Fragmented Data Block Transport:
TS004-1.0.0에 따라 큰 firmware image를 fragment로 나눠 전송·복원합니다.
Application이 FUOTA process를 시작하면 이후 작업은 전용 work queue thread에서 background로 실행됩니다. Firmware upgrade를 성공적으로 수신하면 callback으로 application에 알리고, application은 device를 MCUboot로 reboot해 upgrade를 적용할 수 있습니다.
이 sample이 동작하려면 Clock Synchronization, Remote Multicast Setup, Fragmented Data Block Transport service를 실제로 구현한 LoRaWAN Application Server가 필요합니다.
빌드 및 실행
Sample은 Zephyr tree의 samples/subsys/lorawan/fuota에 있습니다. Build 전에 network가 사용하는 주파수 대역과 일치하도록 prj.conf에서 올바른 region을 선택합니다.
다음 command는 nucleo_wl55jc board용으로 FUOTA sample을 build하고 flash합니다.
west build -b nucleo_wl55jc samples/subsys/lorawan/fuota
west flash
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.