Part 1
요약·해설
지원 조건, board target 교체, exact build·flash command를 보존합니다.
input_events
All input events
Input driver in devicetree
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
4A1995BEC941F6A86322FF61FCBC9C7A40B7E8F0B8EF60ABF26C9E3E4E415445
.. zephyr:code-sample:: input-dump
:name: Input dump
:relevant-api: input_events
Print all input events.
Overview
********
The Input Dump sample prints any input event using the :ref:`input` APIs.
Requirements
************
The samples works on any board with an input driver defined in the board devicetree.
Building and Running
********************
Build and flash as follows, changing ``nrf52dk/nrf52832`` for your board:
.. zephyr-app-commands::
:zephyr-app: samples/subsys/input/input_dump
:board: nrf52dk/nrf52832
:goals: build flash
:compact:
After starting, the sample will print any input event in the console.
Part 3
한국어 전문 번역
개요
Input Dump sample은 Zephyr input API를 사용해 발생하는 모든 input event를 console에 출력합니다. 새 input driver나 board devicetree 연결을 점검할 때 event가 subsystem까지 전달되는지 바로 확인할 수 있습니다.
요구 사항
Board devicetree에 input driver가 정의된 모든 board에서 동작합니다. 즉 특정 sensor나 button 종류보다 올바른 input device node와 driver 구성이 전제입니다.
빌드 및 실행
다음과 같이 build하고 flash하되 nrf52dk/nrf52832를 실제 사용할 board target으로 바꿉니다.
west build -b nrf52dk/nrf52832 samples/subsys/input/input_dump
west flash
Application이 시작되면 이후 발생하는 모든 input event가 console에 출력됩니다.
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.