samples/shields/lmp90100_evb/rtd/README.html · samples/shields/lmp90100_evb/rtd/README.rst 공식 원문 ↗

Zephyr 3.7.0 · Samples · Shields · RTD

LMP90100 EVB 3-wire RTD

Arduino-compatible board에 AFE shield와 PT100을 연결해 resistance에서 temperature를 구합니다.

Official pathsamples/shields/lmp90100_evb/rtd/README.html
Source filesamples/shields/lmp90100_evb/rtd/README.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

User guide Example #3 wiring, FRDM-K64F build와 실제 R·T 출력을 보존합니다.

Sensor

3-wire PT100

AFE

LMP90100 EVB

Board

FRDM-K64F

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 B8C6035C51231510686630E1B00F438EC943C1ADFEF042EFA929F8213FCD2989
.. _lmp90100_evb_rtd_sample:

LMP90100 Sensor AFE Evaluation Board: RTD Sample
################################################

Overview
********

This sample is provided as an example of how to read the temperature
of a Resistance Temperature Detector (RTD) sensor using the LMP90100
Sensor AFE Evaluation Board shield. The sample is designed for use
with a 3-wire PT100 sensor.

Please refer to :ref:`lmp90100_evb_shield` for more information on
this shield.

Requirements
************

Prior to running the sample application, the LMP90100 EVB must be
connected to the development board according to Example #3 ("3-wire
RTD Application") in the `LMP90100 Sensor AFE Evaluation Board User's
Guide`_.

Building and Running
********************

This sample runs with the LMP90100 EVB connected to any development
board with a matching Arduino connector. For this example, we use a
:ref:`frdm_k64f` board.

.. zephyr-app-commands::
   :zephyr-app: samples/shields/lmp90100_evb/rtd
   :board: frdm_k64f
   :goals: build
   :compact:

Sample Output
=============

 .. code-block:: console

    R: 111.15 ohm
    T: 28.66 degC
    R: 111.14 ohm
    T: 28.64 degC
    R: 111.14 ohm
    T: 28.63 degC
    R: 111.13 ohm
    T: 28.61 degC

.. _LMP90100 Sensor AFE Evaluation Board User's Guide:
   http://www.ti.com/lit/pdf/snau028

Part 3

한국어 전문 번역

개요

LMP90100 Sensor AFE Evaluation Board shield로 Resistance Temperature Detector(RTD) sensor의 temperature를 읽는 방법을 보여 주는 sample입니다. 3-wire PT100 sensor용으로 설계되었습니다.

Shield에 관한 자세한 내용은 LMP90100 EVB shield 문서를 참조하십시오.

요구 사항

Sample application을 실행하기 전에 LMP90100 Sensor AFE Evaluation Board User's Guide의 Example #3, ‘3-wire RTD Application’에 따라 LMP90100 EVB를 development board에 연결해야 합니다.

빌드 및 실행

LMP90100 EVB를 matching Arduino connector가 있는 어떤 development board에 연결해도 실행할 수 있습니다. 아래 예에서는 frdm_k64f board를 사용합니다.

west build -b frdm_k64f samples/shields/lmp90100_evb/rtd

출력 예

R: 111.15 ohm
T: 28.66 degC
R: 111.14 ohm
T: 28.64 degC
R: 111.14 ohm
T: 28.63 degC
R: 111.13 ohm
T: 28.61 degC

각 measurement는 PT100 resistance를 ohm으로, 변환한 temperature를 degC로 출력합니다.

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.