Part 1
요약·해설
Compatible-node 요구 사항과 8줄 실제 출력을 보존합니다.
Sensor
TMP108
Period
3 seconds
Optional
Alert · One-shot
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
BAA61469A01EE4DE0240EE81CAA98329C0641087FE0060F4EB16DA848F97FCB6
.. _tmp108_sample:
TMP108 sample
#############
Description
***********
This sample writes the temperature to the console once every 3 seconds. There are
macro definitions included for turning off and on alerts if that is set up, and
also using low power one shot mode.
Requirements
************
A board with the :dtcompatible:`ti,tmp108` built in to its :ref:`devicetree <dt-guide>`,
or a devicetree overlay with such a node added.
Sample Output
=============
.. code-block:: console
** Booting Zephyr OS build zephyr-v2.6.0-1923-g72bb75a360ce ***
TI TMP108 Example, arm
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Part 3
한국어 전문 번역
설명
이 sample은 3초마다 한 번씩 temperature를 console에 기록합니다. Alert를 구성한 경우 이를 끄고 켜는 macro definition과 low-power one-shot mode를 사용하는 definition도 포함합니다.
요구 사항
Devicetree에 ti,tmp108 compatible이 내장된 board 또는 해당 node를 추가한 Devicetree overlay가 필요합니다.
출력 예
** Booting Zephyr OS build zephyr-v2.6.0-1923-g72bb75a360ce ***
TI TMP108 Example, arm
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
Temperature is 22.875C
ARM target에서 22.875°C를 3초마다 반복 출력하는 예입니다.
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.