samples/sensor/sm351lt/README.html · samples/sensor/sm351lt/README.rst 공식 원문 ↗

Zephyr 3.7.0 · Samples · Sensor · Magnetic

SM351LT magnetoresistive sensor

BT510의 low-power magnetic sensor를 0.5 Hz로 읽어 0·1 상태를 표시합니다.

Official pathsamples/sensor/sm351lt/README.html
Source filesamples/sensor/sm351lt/README.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

Hardware 요구 사항, board build와 timestamped digital output을 설명합니다.

Sensor

SM351LT

Board

BT510

Rate

0.5 Hz

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 D2E83E50B1F4E08C74DFCF0EC0D40B7FA57A30D56AC338BA7340FF0CB3BA591B
.. _sm351lt:

SM351LT: Magnetoresistive Sensor Example
########################################

Overview
********

This sample application periodically polls an SM351LT magnetoresistive sensor
and displays if a magnet near to the sensor, via the console.

Requirements
************

This sample uses the Honeywell SM351LT sensor.

References
**********

For more information about the SM351LT magnetoresistive sensor see
https://sensing.honeywell.com/SM351LT-low-power

Building and Running
********************

The SM351LT (or compatible) sensors are available on the following boards:

* :ref:`bt510`

Building on bt510
==================

:ref:`bt510` includes a Honeywell SM351LT magnetoresistive sensor.

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/sm351lt
   :board: bt510
   :goals: build flash
   :compact:

Sample Output
=============

.. code-block:: console

    Polling at 0.5 Hz
    #1 @ 6 ms: 1
    #2 @ 2007 ms: 0
    #3 @ 4009 ms: 0
    #4 @ 6010 ms: 1
    #5 @ 8012 ms: 1

Part 3

한국어 전문 번역

개요

이 sample application은 SM351LT magnetoresistive sensor를 주기적으로 polling하고 sensor 가까이에 magnet이 있는지를 console에 표시합니다.

요구 사항

이 sample은 Honeywell SM351LT sensor를 사용합니다.

참고 자료

자세한 내용은 SM351LT low-power magnetoresistive sensor 페이지를 참조하십시오.

빌드 및 실행

SM351LT 또는 호환 sensor는 bt510 board에서 사용할 수 있습니다.

bt510에서 빌드

bt510에는 Honeywell SM351LT magnetoresistive sensor가 포함되어 있습니다.

west build -b bt510 samples/sensor/sm351lt
west flash

출력 예

Polling at 0.5 Hz
#1 @ 6 ms: 1
#2 @ 2007 ms: 0
#3 @ 4009 ms: 0
#4 @ 6010 ms: 1
#5 @ 8012 ms: 1

Sample은 0.5 Hz, 즉 2초마다 상태를 읽습니다. 각 행은 sample 번호, 시작 후 경과 시간과 magnet detection 상태 0 또는 1을 보여 줍니다.

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.